Weak cationic softener flake in washing plant

Physical and chemical indicators:

Composition: Fatty acid amide compound

Appearance: light yellow flakes

PH value: 4.0-5.5 (6-10% slurry)

Ionicity: weak cation

Dilution method:

Cold water: Put the softener flake into the normal temperature water of 25℃-30℃ at a ratio of 5% - 10%, and soak it for 60-90 minutes. After it is fully swollen, stir it at low speed to a uniform slurry state, and set it aside for later use.

Hot water: Put the softener flake into normal temperature water at a ratio of 5% - 10%, stir while raising the temperature to 50℃-65℃,then keep it warm and stir for 20-30 minutes to a uniform slurry state, and seal (to prevent the diluent from forming a skin) Cool and set aside.

Application:

Padding type (one dip and one padding or two dips and two padding): Dosage: 20-50g/L (10% dilution) Rolling residue rate (pick up): 60%-100%

Exhaust type: 2%-5% (o.w.f) (10% dilution)  Process: normal temperature ~ 40°C × (5 ~ 30) min  Liquor ratio: 1:6~1:20

Application characteristics:

Suitable for all types of 100% cotton, polyester/cotton fabrics, and recommended for use on all types of denim fabrics.

• Outstanding soft and fluffy feel, widely used for hand finishing of various pure cotton, polyester/cotton fabrics and various denim fabrics.
• Easily soluble in water at room temperature. It is recommended to soak it three to four hours before use. Simply stir it until it is completely dissolved.
• High cost performance.
• Has certain hydrophilicity.

Storage and packaging:

Store in a cool place with a storage period of 9 months;

Package is 25kg / bag, plastic woven bag.